Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
Search
12Next
Return to list New
View: 420|Reply: 11

Self-check Avalon Miner Failure According to The Indicator Light

[Copy link]

65

Threads

65

Posts

246

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
246
Post time 2021-12-28 14:16:34 | Show all posts |Read mode
Self-check Avalon miner failure according to the indicator light
In the daily operation of the Avalon miner, we will also encounter problems such as the status indicator flickering and the indicator light does not light up. You can combine these features to perform a simple fault self-check.
I. Avalon miner indicator light (MM board position)
When the Avalon miner is running normally, the display light of the Avalon miner should be following:
1) Blue light: AUC andRaspberry Pi are connected, and the miner is in regular operation;
2) Yellow light: The miner is currently idle and can be connected to AUC and Raspberry Pi;
3) White light: The miner has voltage input and is ready for fan inspection;
If the test is successful, the indicator light will change from white to yellow, and if the test is unsuccessful, it will light up red.
(Suggestion: It indicates that the fan may be faulty, and you can further check the backstage parameters)
4) Red light: the Avalon miner is malfunctioning.
II. Power interface (PMU board position)
1) Green light: regular power supply
2) Red light or no light: the power supply is abnormal, the PMU board has a problem or the power interface is loose;
(Suggestion: You can try to replug the power cord or restart)
III. Raspberry Pi
1) After the Raspberry Pi is usually powered on, the status indicator lights up in red and green.
2) If the Raspberry Pi only lights up in red after power on, it means that the Raspberry Pi has not inserted the TF card or the TF card is damaged.
(Recommendation: plug in the TF card or replace with a new TF card)
If you have checked the above reasons, it is also possible that the Raspberry Pi firmware has not been burned (flashed) successfully
(It is recommended to re-burn the Raspberry Pi firmware."
3) After the Raspberry Pi is connected to the network typically, the yellow light on the network cable interface will be on and the green light will flash continuously.
IV. AUC3
1) After the power is turned on, the AUC3 power indicator will always be yellow, and the status indicator will be blue
If AUC3 only lights up the power indicator yellow light, there is a problem with the network.
(Recommendation: Check whether the network settings are standard, or the AUC is powered off and restarted)
2) Waiting for the data transmission status, the AUC3 status indicator light will change alternately between blue and red lights.
3) During the regular operation of AUC3, the status display light is green, flashing red and green every 15 seconds.
If the status indicator turns blue or goes out or stays red, there is a problem with the miner control board.
The above is the identification method of the various indicators of the Avalon miner. After reading this article, do you understand the "signals" sent by these Avalon miners?

ASIC Miner Repair Toturials and Guides
Reply

Use magic Report

0

Threads

1

Posts

4

Credits

Novice

Rank: 1

Credits
4
Post time 2022-8-25 21:31:01 | Show all posts
Instructions for checking Avalon miner error according to your indicator light are very detailed, drift boss smash karts I will follow and if there is anything wrong, I will report back to the system.
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:34:20 | Show all posts
This is a fantastic website , thanks for sharing.        The Freedom Era
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:39:03 | Show all posts
I recently found many useful information in your website especially this blog page. Among the lots of comments on your articles. Thanks for sharing.        The Freedom Era
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:42:41 | Show all posts
If you don"t mind proceed with this extraordinary work and I anticipate a greater amount of your magnificent blog entries        Nick Peroni
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:45:52 | Show all posts
This was incredibly an exquisite implementation of your ideas        Nick Peroni
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:50:03 | Show all posts
Personally I think overjoyed I discovered the blogs.        Nick Peroni
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:53:59 | Show all posts
so happy to find good place to many here in the post, the writing is just great, thanks for the post.        Univera Review
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 18:57:11 | Show all posts
I’ve been searching for some decent stuff on the subject and haven't had any luck up until this point, You just got a new biggest fan!..        Univera Review
Reply

Use magic Report

3

Threads

650

Posts

1389

Credits

Gold member

Rank: 6Rank: 6

Credits
1389
Post time 2022-8-28 19:01:22 | Show all posts
I recently came across your article and have been reading along. I want to express my admiration of your writing skill and ability to make readers read from the beginning to the end. I would like to read newer posts and to share my thoughts with you.        Univera Review
Reply

Use magic Report

12Next
Return to list New
You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list