Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
Search
View: 347|Reply: 0

How to Distinguish the Raspberry Pi Version?

[Copy link]

65

Threads

65

Posts

246

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
246
Post time 2021-12-28 11:42:22 | Show all posts |Read mode
How to distinguish the Raspberry Pi version?
We know that the Avalonminer is different from other products. It needs to be connected to the Raspberry Pi and AUC converter card for normal use. Customers often ask how the Raspberry Pi should be purchased and universally used for Avalon products. Today, I will give you a brief analysis of distinguishing Raspberry Pi.
The Raspberry Pi currently on the market is divided into the card and cardless versions, suitable for Avalon 7-9 series miners. The Avalon A10 series miners manufactured after August 2019 are all-in-one miners and do not need to use the above accessories.
Raspberry Pi with card version
The card version of the Raspberry Pi is divided into 1, 2, and 3 generations, and the appearance is the same. The difference is that the serial number on the circuit board is different. The 1, 2, and 3 generations have two series, B and B+. The firmware provided by Avalon is only for the B series, and the B+ series is not applicable. (If you buy through unofficial channels, please inquire whether it is a B series)
Note: The corresponding firmware of different batches of Raspberry Pi is different. If you flash the wrong firmware, the miner will not operate normally.
Identification method
The easiest way is to check the serial code. There is a string of numbers on the internal circuit board of the Raspberry Pi. For example, the number of the third generation of Raspberry Pi is Raspberry Pi 3 Model B, and the number of the first and second generations is 1, 2.
The left side is B, the right side is B+, and the pin of B+ is shorter.
The left side is the 1st generation, the right is the 2nd generation, the 1st generation has a larger raspberry logo.
The 3rd generation raspberry logo is on the left side of the chip.
Parameter difference
project
Type A+
Type B
Type B+
2nd generation B type
SoC (System on Chip)
Broadcom BCM2835 (CPU, GPU DSP and SDRAM)
Broadcom BCM2836
CPU
ARM1176JZF-S core (ARM11 series) 700MHz single-core
ARM Cortex -A7 900MHz 4core
GPU (graphics processing unit)
Broadcom VideoCore IV, OpenGL ES 2.0, 1080p 30 h.264/MPEG-4 AVC HD decoder
RAM
256MB
512M
1GB
USB 2.0
1 (Support USB hub expansion)
2 (Support USB hub expansion)
4 (Support USB hub expansion)
Video output
RCA video interface output (only 1st generation type B has this interface), supports PAL and NTSC standards, supports HDMI (1.3 and 1.4), the resolution is 640x350 to 1920x1200, supports PAL and NTSC standards.
Audio output
3.5mm jack, HDMI (high-definition multiple audio/video interface)
SD card interface
Micro SD card interface
Standard SD card interface
Micro SD card interface
Network involvement
No (need to pass USB)
10/100 Ethernet interface (RJ45 interface)
Extension ports
40
26
40
rated power
Unknown, but lower
700 MA (for 3.5 W)
600 MA (for 3.0 W)
1000 MA (5.0W)
power input
5V, through MicroUSB or GPIO pin
Overall size
65x56mm
85.60x53.98mm
85x56x17mm
operating system
Debian GNU/Linux, Fedora, Arch Linux, RISC OS, the 2nd generation B model supports Windows 10 and Snappy Ubuntu Core, more operating systems, so stay tuned!
Raspberry Pi without Card
The cardless Raspberry Pi is currently the most popular series. It does not require a memory card and comes with the Raspberry Pi program. It can be flashed according to the needs before leaving the factory and used directly.
Note: Compared with the previous version, Avalon's latest Raspberry Pi officially launched has the reset button function, and the internal structure has not changed.
The latest version of Raspberry Pi without a card
Suggestions for using Raspberry Pi
The Raspberry Pi has 4 USB ports, which can be connected to 4 AUC3 at most, and 1 AUC3 can carry up to 5 machines, that is, control and manage up to 20 machines. It is recommended to bring 2 AUC3s, which means 10 machines are running stably. If the operation is normal, you can add them step by step.
The content of this article is from the Internet, compiled and edited by ZEUS MINING.


ASIC Miner Repair Toturials and Guides
Reply

Use magic Report

You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list