Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
View: 327|Reply: 0

What Are the Failures Phenomenon of Firmware Upgrades of Ebang Miners?

[Copy link]








Rank: 7Rank: 7Rank: 7

Post time 2021-11-25 11:19:31 | Show all posts |Read mode
What Are the Failures Phenomenon of Firmware Upgrades of Ebang Miners?
The upgrade is shown in the figure below. The upgrade progress and the IP address of the upgraded miner will appear when the interface is usually upgraded. After the upgrade is completed, the upgrade dialog box that appears below is blank, which proves that the upgrade of all miners selected for upgrade is completed;
If the upgrade is unsuccessful, there will be no change in the firmware version. The following phenomena:
Upgrade unsuccessful 1: During the normal upgrade process, due to different system settings, the upgrade miner will appear in the upgrade dialog box, but there is no upgrade progress display. In this way, the upgrade of the miner will cause the final miner upgrade to be unsuccessful;
1. Turn off all antivirus software on the computer (such as 360 Security Guard, 360 Antivirus Software)
2. Turn off the system firewall;
3. Use a computer with a fixed IP address to connect to the server;
Upgrade unsuccessful 2: After the upgrade is completed, the miner is not restarted normally, resulting in the unsuccessful upgrade of the miner;
Upgrade unsuccessful 3: If the version is not upgraded as required, the firmware package should be upgraded to the lower version first and then the higher version. If the firmware package is upgraded beyond the level, it will cause the machine to crash and other problems.

ASIC Miner Repair Toturials and Guides

Use magic Report

You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list