Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
View: 284|Reply: 0

Troubleshooting for High Rejection Rate of Miner

[Copy link]








Rank: 7Rank: 7Rank: 7

Post time 2021-11-25 09:17:35 | Show all posts |Read mode
Note: After the miner is online, due to different environmental and network factors, there will be a high rejection rate, which will cause the hash rate to fail to meet the standard, which will affect the profit;
There are three typical troubleshooting methods (it is recommended to test in small batches):
Network troubleshooting: Determine whether there is packet loss in the test network or directly use the miner (extract a miner with a high rejection rate) to move to another network for testing; if the miner shows normal, it means that the network problem is severe; Focus on troubleshooting network failures;
Mining pool investigation: Only when the miner is configured with all data can it go online and generate hash rate data. If the rejection rate is high, replace the mining pool for testing. If part of the miner is replaced, the mining pool rejection rate is low or zero; Can troubleshoot the mining pool;
Miner inspection: If the above two scheme tests are passed, the rejection rate still exists, and carry out the miner inspection. If the site environment permits, a miner of another type or the same type can be selected in the other miner room of the site for online inspection; if the testing miner is operating normally, It can preliminarily judge that the miner has a software BUG; you can contact the nearest maintenance center for judgment and confirmation.

ASIC Miner Repair Toturials and Guides

Use magic Report

You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list