Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
Search
12Next
Return to list New
View: 555|Reply: 10

Whatsminer Troubleshooting and Solution

[Copy link]

65

Threads

65

Posts

246

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
246
Post time 2021-11-20 13:46:24 | Show all posts |Read mode
Whatsminer Troubleshooting and Solution
Hash rate didn't reach the standard
1. Miner didn't warm up enough.
Solution: Miner needs to have a warm-up time of 15~ 25 minutes before the hash-rate gets into the normal range.
2. Hash board slot missing.
Solution: Re-plug the cable on both ends of the hash board, then restart the miner.
3. Zero hash rate.
Solution: Re-plug the cable on both ends of the hash board, then restart the miner.
4. PSU connect failure.
If the PSU control wire is not correctly connected, it will be shown as below status in the hostname row.
You need to re-plug the PSU control wire and restart the miner.
Miner restart due to abnormal status
1. Power supply unit failure.
PSU fans don't work or power supply unstable, change another PSU and restart the miner.
2. Miner overheat.
Please re-plug the PSU, and try to improve the cooling system of the mining facility.
Below is the errors status shown on the control board.
3. Power supply system unstable causing ( P3 is supplying 2150W +- 5%).
a. When a miner is running, please confirm the voltage is in the range of 176~ 264V.
b. All the miner power consumption will not exceed the total power capacity of the facility.
4. Miner restart due to low hash rate.
Please re-plug the cable on the hash board, to avoid connection failure.
You can find abnormal events like below.
Miner can not search IP address (when using Whatsminer tool)
1. Check if the operating computer is in the same network as miners.
2. Check abnormal status by signal LED.
a. Network port signal: yellow always on, green flickering.
b. Restart the miner and re-search the IP address
c. Reset the miner (press the “RESET" button over 3 seconds, until red-green light flickering). Then research the IP address.
d. Change the miner control board, to determine if the previous control board is down.
3. Check if the DHCP function of the router has been enabled.
Allow miner to acquire IP automatically.
4. Miner IP found the button broken.
Green LED
Red LED
Red LED Freq
Status
Reason
ON
ON
-
Miner is starting up

Ficker
Ficker
-
Miner is running normally

Ficker
Ficker
1sec
Hash board Failure
Missing Hash board or
Connection
Failure
Ficker
Ficker
2sec
Fan Failure
Miner Program is not running or Fans Failure
Ficker
ON
-
Other Failure
Miner Program is not running, not connect to Pool, Temperature Sensor Dead, Overheat
Miner control board page issue
The Hash rate is normal, but cannot access the backend of Miner.
Solution: update the latest version of the firmware.
Fans failure
1. Fans not working at all.
a. Cut off the power, re-plug the cable to fans, and check again.
b. Check if the fans were stuck by mesh shell. (The fans noise will be extremely large)
c. Change another fan and recheck.
2. Fans speed is abnormal in the control panel.
E.g: Fans over 6000rpm once turn on the miner. No RPM is shown in the control panel.
a. Cut off the power, re-plug the cable to the fans.
b. Change control board, to determine if its control board damage or fans damage.
Control board signal always ON or OFF
1. Check the status of the control board.
a. Check if the power supply voltage is at 176~264V.
b. Only power on the control board, check if there's signal light on.
(Note: if the signal is not on, please change a PSU and retry)
c. Power on each hash board, check if they can all acquire IP addresses.
2. Signal always ON.
a. Initialize cards. Need to get a reader and SD cards (at least 1GB), we will send you a mirror of the file for initializing cards.
b. Use the SD card to override the miner's File. If successful, the signal will be turned off.
c. Cut off the power, take out the SD card, and restart the miner.
The router's IP address quantity is not enough
For example, if the client has 101 miners, the router's default IP address is ranging from no100 to no199. (Total 100 IP adress). Then it will have a conflict of IP address in 1 miner. This will cause some miner couldn't get the IP addresses.
Solution: Change the IP pool range in the DHCP server (recommend set to 2~254). Click save, then acquire the IP address again.
Attention
Please switch the power off before removing any cable.

ASIC Miner Repair Toturials and Guides
Reply

Use magic Report

1

Threads

2

Posts

7

Credits

Novice

Rank: 1

Credits
7
Post time 2022-4-30 17:47:46 | Show all posts
I didn't expect that it is possible to write a top-grade business administration essay with no headache. Thanks to these great samples, I could get rid of stress https://superbgrade.com/essays/category/business-administration
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 22:46:47 | Show all posts
Great tips and very easy to understand. This will definitely be very useful for me when I get a chance to start my blog.        Tim Sanders
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 22:50:04 | Show all posts
I really appreciate the kind of topics you post here. Thanks for sharing us a great information that is actually helpful. Good day!        Tim Sanders
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 22:52:05 | Show all posts
Always so interesting to visit your site.What a great info, thank you for sharing. this will help me so much in my learning        Lurralife
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 22:53:49 | Show all posts
Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I’ll be subscribing to your feed and I hope you post again soon.        Tim Sanders
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 22:57:56 | Show all posts
Personally I think overjoyed I discovered the blogs.        Pyjama Bosses
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 23:07:52 | Show all posts
I would recommend my profile is important to me, I invite you to discuss this topic...        Pyjama Bosses
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 23:10:49 | Show all posts
I am always searching online for articles that can help me. There is obviously a lot to know about this. I think you made some good points in Features also. Keep working, great job        Coaching Training Alliance
Reply

Use magic Report

3

Threads

651

Posts

1393

Credits

Gold member

Rank: 6Rank: 6

Credits
1393
Post time 2022-8-28 23:17:46 | Show all posts
I’m happy I located this blog! From time to time, students want to cognitive the keys of productive literary essays composing. Your first-class knowledge about this good post can become a proper basis for such people. nice one        Pyjama Bosses
Reply

Use magic Report

12Next
Return to list New
You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list