Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
Search
View: 275|Reply: 0

What should be Done if the Hash Rate CannotReach Standard Range?

[Copy link]

65

Threads

65

Posts

246

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
246
Post time 2021-11-20 10:13:48 | Show all posts |Read mode
What should be done if the hash rate cannot reach standard range?
When the hash rate of Innosilicon miners drops or is insufficient, how should I troubleshoot them?
1. Check the ambient temperature (recommend choosing the GS320 infrared thermometer), because the temperature rises, the power consumption will rise, and the over-temperature protection will cause the hash rate to drop.
Confirm the inlet air temperature. The operating temperature range of the miner is 0-40℃. Therefore, the inlet air temperature should be lower than 30℃ to keep the miner in good condition.
2. Whether the heat dissipation of the mine is done well, whether there is hot air returning or whether the fan and power supply of the miner is blocked.
3. Check whether the miner's firmware version is regular for the inlet air temperature.
1) If the firmware version is August 2018, please perform the following re-aging procedure:
2) If the firmware version of the miner is earlier than August 2018, please upgrade the firmware.

ASIC Miner Repair Toturials and Guides
Reply

Use magic Report

You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list