Please select To the mobile version | Continue to access the desktop computer version

zeusbtc bbs

 Forgot password?
 Sign up now
Search
View: 278|Reply: 0

How to Use a Multimeter to Test the Power Supply?

[Copy link]

65

Threads

65

Posts

246

Credits

Moderator

Rank: 7Rank: 7Rank: 7

Credits
246
Post time 2021-11-19 15:53:09 | Show all posts |Read mode
Edited by Sophie at 2021-11-20 11:21

How to use a multimeter to test the power supply?
This article applies to all APW series power supplies.
Please follow the steps below to test whether the power supply is damaged:
1. Make sure the power cord is plugged in correctly;
2. Set the fluke 15b+ multimeter to D/C to check the D/C voltage of the power supply;
3. There are two ways to insert the probe:
  • Connect the red or black probe to the yellow and black connectors.
  • Insert the red or black probe into the positive and negative terminals of the power supply.

4. Check the voltage reading. If it displays 12±0.5V, it means the power supply is working normally; if it displays 0V, it means the power supply is not working correctly and needs to be repaired.
Or, you can buy a new power supply here to replace the damaged power supply.
If you still cannot resolve this issue, please get in touch with us for further assistance.

ASIC Miner Repair Toturials and Guides
Reply

Use magic Report

You have to log in before you can reply Login | Sign up now

Points Rules

Privacy Policy Terms of Service
Quick Reply To Top Return to the list